·Argon 18
    ·Gen 2 Power Meter System
    ·Feedback Sports
    ·Selle Italia
    ·Sella Italia

Pioneer Cannondale Consumer Supplied Left Crank Power Meter

Pioneer Cannondale Consumer Supplied Left Crank Power MeterPioneer Cannondale Consumer Supplied Left Crank Power Meter
click image to enlarge


About Pioneer Cannondale Consumer Supplied Left Crank Power Meter

The SGY-PMLTC enables cyclists to ride with power in a few easy steps.

Pack your left crank arm and ship it directly to Pioneer’s installation center where the advanced power meter technology is installed. Pioneer has a proven system performing the ship, install, and return procedure and facilitates a quick turn-around of the consumer’s crank arm with power meter. Throughout the entire process Pioneer keeps in constant communication.


Pioneer's Most Affordable Step Into Power Measurement - Now compatible with Shimano Dura-Ace R9100, 9000, Ultegra 6800, R8000, 105 (FC-5800), XT (FC-M8000), XTR Trail (FC-M9020), Cannondale Hollowgram Si and SiSL2, and Campagnolo Potenza crank arms, the SGY-PMLTC consumer kit requires no new investment in another crank arm. Power sensors are compatible with 165, 167.5, 170, 172.5, 175, 177.5 and 180mm arm lengths and only adds 22 grams to your crank arm.

12 point force measurement for high accuracy and advanced metrics - 
Pioneer measures pedaling forces every 30˚, for 12 points of measurement per revolution. However, within those 12 points, Pioneer scans those pedaling forces an incredible 16 times, for an unbelievable 192 data points each rotation of the crank! This level of measurement is what leads to the accuracy of Pioneer power meters, as well as the basis for HDPower Metrics analysis.

Advanced HDPower Metrics further power and pedaling metrics analysis - Pioneer’s Cycle Computer unlocks the HDPower Metrics that allow riders to see Force Vector analysis, as well as Torque Vector and Pedaling Efficiency power metrics. These can be viewed on the Cycle Computer while riding, or in post-ride analysis using Pioneer’s free cloud-based Cyclo-Sphere software. Introduced over two years ago, these innovative features have not been matched by any of our competitors.

Compatible with ANT+ Cycle Computers - ANT+ is a low-powered (2.4GHz range) wireless communications standard used by most cycle computer brands. The Pioneer Power Meter can easily pair with ANT+ compatible cycle computers and display power measurements that are available on that computer. For the full range of never-been-seen-before data including force vectors, torque vector, and other measurements, it must be paired with the Pioneer Cycle Computer.

A path for consumers to upgrade their system to a Dual Leg power meter system as they grow with their power analysis - Upgrade your analysis by adding a drive side upgrade kit, send in your existing crank to be upgraded to a Dual Leg system. There is no better, or more detailed tool for analyzing power or pedaling balance metrics than a Dual Leg system, especially when combined with Pioneer’s HDPower Metrics.

Race-tested, rider-perfected - The Pioneer Power Meter is built to perform in the toughest conditions. It was refined over a punishing season of racing through rain, snow, cobbles, mud and the thigh-burning climbs of the world’s most prestigious grand tours. It’s lightweight, fully-integrated design adds just 64 grams to your crank, measures up to 2,150 Watts @120 RPM, and is accurate to within +/- 2%. It can be easily calibrated for varying temperatures and elevations and is available in red and black transmitter caps.


Post-ride data like you’ve never seen before - The ultimate training tools. Cyclo-Sphere for PC and supporting Cyclo-Sphere Mobile App let you analyze every moment of every ride. Simply upload your ride data to Cyclo-Sphere to view total power, power balance, force and torque vector charts, pedaling efficiency, heart rate, speed, cadence, distance, altitude, temperature, and much, much more.

Cyclo-Sphere Mobile App provides quick access to your Workout List with a powerful Segment Compare feature that allows you to choose where and when you want to challenge yourself the most. Both Cyclo-Sphere PC and Cyclo-Sphere Mobile App are complimentary with your Pioneer Cycle Computer.



Included Crankset: Compatible with DURA-ACE R9100, 9000, ULTEGRA R8000, 6800, 105 (FC-5800), XTR Trail (FC-M9020), XT (FC-M8000), Cannondale Hollowgram Si and SiSL2, Campagnolo Potenza 11

Crank Arm Length Options (mm): 165 / 167.5 / 170 / 172.5 / 175 / 177.5 / 180mm

Chainring Options: N/A

Left and Right Arm Strain Guages: 165 / 167.5 / 170 / 172.5 / 175 / 177.5 / 180mm

12-Point Force Direction Measurement: Left Only

Dual Accelerometers per Crank Arm: Yes

Pioneer Pedaling Monitor Mode: For use with Pioneer Cycle Computers

ANT+ Mode: For use with ANT+ Cycle Computers

Discrete L/R Zero Calibration Memory: Yes

Accuracy: +/- 2%

Chainring Exchangeable (Shimano only): Yes

More About The Manufacturer Pioneer

Founded in 1938 when Nozomu Matsumoto began making speakers in his garage, Pioneer is now a world leader in electronics products for the car, home and business markets. Known for its music and domestic electronic products, the company expanded into the sporting sector in late 2013 with the advent of a cycling power monitoring system.