This product is upgraded in-house by a certified CeramicSpeed Technician and comes pre-installed with the below CeramicSpeed component:

1x Campagnolo H11 Disc Ultra-Torque 11s Crankset

1x CeramicSpeed BB86 Campy UT Bearing Kit

CeramicSpeed Bottom Brackets guarantee you the lowest friction, optimised power transfer, and longest product lifetime, helping you to save watts or ride faster. Choosing to upgrade with a bottom bracket with coated bearings, you benefit from even further reduced friction and better resistance to contamination and corrosion.

Campagnolo H11 Disc Ultra-Torque 11s Crankset

The Campagnolo H11 Ultra Torque Crankset is designed with the intention of being used with the H11 groupsets, which is the Campagnolo disc brake standard.

Campagnolo has succeeded in providing the same level of exceptional drivetrain performance as the Campagnolo rim brake groupsets.


Ultra-Torque - Campagnolo found a way to permanently conjoin the semi-axles of the bottom bracket to the respective crankset arms. This redesign made it possible to considerably reduce the lateral dimensions at the axle level and prevent annoying contact with the ankles when turning the pedals. Assembly is simplistic: one single oversize bolt is enough to integrate the two semi-axles. Regarding torque transmission efficiency, this system is equally as effective as a single piece axle. Furthermore, despite the narrow side profile, Campagnolo managed to position the bearings outside the bottom bracket shell, resulting in greater axle rigidity from the increased axle diameter. This breakthrough was obtained by using an ingenious mechanical system derived from many years' motoring experience in the rotation axle and engine shaft coupling design known as the Hirth joint.


Hollow carbon crank arms and a hollow spider, it provides maximum stiffness at a competitive weight.

Designed for Disc Brake Hub Spacing.

The H11 crankset standard is required for use with H11 Ergopower shifter/brake levers for true drivetrain efficiency.

Crank spider has been placed outwards from the frame to adjust for 135mm and 142mm disc brake hub spacing without needing to change the Q-factor.


Material: Carbon

Chainline/Hub Compatibility: 135mm and 142mm rear spacing

Intended Use: Road

Drivetrain Speed: 11-speed

Pedal Spindle: 9/16"

Spindle Interface: Ultra-Torque

Weight: 603g


CeramicSpeed BB86 Campy UT Bearing Kit

CeramicSpeed Bottom Bracket Bearings that fit BB86 standard between Campy UT 25 mm spindle and frames with a 41 mm inner shell diameter.

The bearings are available in the standard or coated version.

Outperforming every other steel or ceramic bearing standard set in the cycling industry, the CeramicSpeed Bottom Brackets have been developed to deliver unique performance properties.

All CeramicSpeed Bottom Brackets are handmade and checked several times during the productions process.

The special coating used on the coated bearings has several properties that improve the lifetime of the product by increasing the hardness of the races. For this product, you need to use spacers, which are included in the packaging. 


Width: 86mm

Axle Diameter: 25mm Campy UT

Be The First To Review This Product!

Help other FRF Sports users shop smarter by writing reviews for products you have purchased.

Write a product review