Different cap - same content. The world is short of caps these days, and we are therefore temporarily forced to using white caps for our UFO Drip bottles. Everything else is as usual and the content is still the worlds fastest chain coating.
This new and improved formula of the CeramicSpeed UFO Drip Chain Coating is even faster and longer lasting than the first formula.
The chain coating is developed to support all disciplines and is based on a non-toxic, non-flammable and bio-degradable formula.
180ml / 6oz bottle contents
300 km. per coating
Up to 35 coatings per bottle
Over 15% faster than previous formula
Increased temperature stability - apply between 5-35oC / 41-95oF
What temperature can I apply UFO Drip?
5-35 °C / 41 - 95 degrees Fahrenheit
What temperature is safe to store UFO Drip?
5-30 °C / 41 - 86 degrees Fahrenheit
Storage is stated 10-30°C on the bottle. Can it go lower or higher?
Stress tests below 5°C and above 35°C have been performed. At these temperatures, the viscosity can become quite thick and it becomes necessary to shake well to make the UFO Drip flow again. The first cm may still be thicker and this is OK to apply to the chain as the functionallity is still present. In extreme cases it may be necessary to clear the cap with a needle.
Why do you recommend to wait overnight after appling UFO Drip? How long do I need to wait?
The wax particles in the lube work best when they are dry and merged together as a solid wax . In the bottle the particles are dissolved in water and the water needs to evaporate before the wax particles can merge together as a solid wax coating. Additionally, allowing the wax to fully dry prevents dirt, grime, or road dust to contaminate the wax or create a dirty chain.
What is the clicking sound inside the bottle when shaking?
UFO Drip is unique as it is made initially with dry wax powder in order to achieve the least friction of all lubes. If not disturbed for many days, or after big temperature variations, the viscosity will be thicker. To efficiently reconstitute the formula, a bolt is included inside the bottle, ensuring even mixing and returning UFO Drip to a liquid/thinner viscosity.
The first cm UFO Drip out of the cap is thick?
If not disturbed for many days, or after big temperature variations, a small amount of wax can congeal in the nozzle. This is normal and OK to apply onto the chain where it will disperse across the links.
How to Apply UFO Drip
For new chains and first application, fully clean and dry the chain, ensuring to rinse all cleaner off before drying. We recommend CeramicSpeed Clean Drivetrain for this purpose. Always shake your UFO Drip bottle well before each use to ensure an even application of waxes. Apply UFO Drip directly to the chain rollers over the cassette, rotating the chain slowly backwards to coat the entire length of the chain twice. Next, apply UFO Drip to the inside of the chain, along the rollers on the bottom span over the chain and coat the entire length of the chain twice. . Allow UFO Drip to dry a minimum of 8 hours for best results and clean performance.
For follow up applications with an overall clean drive train, wipe the chain surface with a dry and clean cloth. Shake the UFO Drip bottle well. Apply UFO Drip directly to the chain rollers over the cassette, rotating the chain slowly backwards. Coat the entire length of the chain twice. Let dry for 8 hours. If your drive train has become thoroughly dirty and contaminated, begin with a full cleaning & coating as you would for a first application.
Size: 180ml (6oz)